BriteMED MMS-21C, User Manual, Page: 32 / 55

MMS-21C User Manual
Page 32
4.1 Using the OSD Control Knob
The OSD control knob is located on the bottom left corner of the rear panel ( Figure 4-1 ).
To change the monitor settings using the OSD control knob, follow the steps below:
Step 1:
Press the control knob to open the OSD window.
Figure 4-1: OSD Control Knob
Step 2: Rotate the control knob to select an item, and then press the knob to confirm the
selection.
Step 3: When an item is selected, rotate the control knob to change its setting.
Step 4: Press the control knob to confirm the setting and exit. Step 0: