10 BriteLyt Rapid 829/500CP
Step 6
Rotate the hand pump knob
to unlock it.
Plunge the pump in and out
until your pressure gauge
reads between the red line
and 3 on the indicator.
When finished re-lock the
hand pump knob in it’s down
position.
If you are using the EZ-
Pump attachment with
pressurized air see page
12 and disregard step 6.
Step 7
Open the rapid pre-heater
by pushing the lever down
opening the flow of fuel.
Immediately light the now
flowing fuel just above the
open lever using a lighter or
match. Lighters are the rec-
ommended ignition source.
If needed, unlock hand
pump and again plunge
repeatedly to maintain pres-
sure in tank.
