
OPERATION
Place this unit on a firm, level surface and plug into a grounded 230/50Hz power outlet. Only operate this heater
when it is in upright position and the base is attached. This unit is equipped with two switches for 3 settings.
Left: 800W
Right:1200W
CARE AND MAINTENANCE
Unplug the unit and let it cool completely.
Keep this unit clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth.
Do not use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may
cause damage or deterioration to the surface of the heater.
Although this heater can be used outdoors, for your safety, do not immerse the heater in water or allow it to get
wet.
Wait till the unit is completely dry before use.
Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified
electrician or by a recommended service center.
SPECIFICATION
Rating:
230V/50Hz
Power:
2000W
IP rating:
IPX4
Item size:
220cm(H)X50cm(D)
DISPOSAL
Environmental Protection
Waste electrical production should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.