Britec HEPADRY BD12 WIFI, User Manual

Page: 35 / 63

36
STORAGE
DISPLAY ERROR CODES
If the dehumidifier will not be used for a long period of time, take the following steps:
1- Remove the plug from the socket and empty the tank, make the tank and the dehumidifier dry completely, this
may take a couple of days.
2- Clean the air filter .
3- Check the dehumidifier for perfect condition to ensure a safe use of it after a long period of storage.
4- Pack the device with the suitable packaging.
5- Store the dehumidifier in a dust-free and out of direct sunlight location, preferably covered with a sheet of
plastic.
Please contact local distributor if any of the error codes below appears.
Display Code E1 E2 L3 L4
Error Temperature sensor
error
Humidity sensor error Air inlet temperature is
too high>42 0 C
Air inlet temperature is
too low<
0
0 C
Display Flash every 30
seconds
Flash every 30
seconds
Slowly flash L3 Slowly flash L4
What is happening Machine works
normally
Machine works
normally, but can’t
set the humidity
Compressor stop
working, fan works
at low fan speed.
10mins later, if
the temperature
decrease to below
40 0 C, machine will
work normally.
Compressor stop
working, fan works
at low fan speed.
10mins later, if the
temperature increase
to above 2 0 C,
machine will work
normally