11
Application 3 – Multiple Floor Home Networking (2)
By turning off the
Wi-Fi
function (need to operate in the web page settings),
HomePlug AV
Wireless N Extender
acts as
Powerline Ethernet Bridge
, which, when used together with other
remote
Powerline Ethernet Bridge
, enables other remote Ethernet devices (ex. IP devices or PC)
on the different floor to communicate via the embedded Powerline technology.
Fast Encryption by Buttons
The factory default wireless setting of this device is “
WPA-PSK
” mode and default with a set of Wi-Fi
name and password on a sticker at back of the device. This section describes (1) quick wireless
encryption set up using
WPS Button
and (2) quick encryption set up in a PLC network group using
Group Button
.
Setting Wireless Encryption by WPS Button
This button can be pressed for WPS PBC authentication. The default security mode is WPA-PSK,
you may login the web configuration to set it to other modes. Then press the WPS button on this
device and then press WPS button on the WLAN station/client card to start WPS process. It is also
working if pressing WPS button on the WLAN station card first and then this device. The WPS
process will be started and connected after a few seconds.
For those WLAN station card without physical WPS button, the software WPS button should be
found in its utility software for this function.
Summary of Contents for BVH-5101
Page 1: ......
Page 2: ......
Page 29: ...28 Administration Management System Management ...
Page 40: ...28 ...