02
BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND THE INSTRUCTIONS.
INCORRECT ASSEMBLY MAY MAKE THE COT UNSAFE. KEEP THESE INSTRUCTIONS IN A
SAFE PLACE FOR FUTURE REFERENCE.
WARNINGS
.
Never leave your child unattended.
.
Do not use your cot if any part is broken, torn or missing.
.
Do not use or leave the cot near open fi
r
es, naked flames, electric bar fi
r
es, gas fi
res,
stoves, heaters or barbecues.
.
Do not place the cot where your child could reach medication, money, string, elastic,
small toys or other small objects.
.
Do not place the cot near trailing cor
ds, leads or flexes such as co
rds or electrical
leads, etc.
.
Do not use additional mattress or padding.
.
Do not place toys or other objects in the cot which could provide a step or foothold to help
the child climb out.
.
Cots with padded rails should not be used if the covered fabric is torn or bitten through.
.
Do not use parts or accessories except those tested and app
roved by Steelcraft.
.
Always check that the folding parts are fully locked before using the cot.
.
Do not place more than one child in the cot at the same time.
.
Do not use this cot with a child who can climb out, weighs more than 15kg, or is taller than
90cms.
.
When using a fitted sheet it must fit the matt
ress tightly.
.
Check that the assembly of the cot is correct and safe.
.
The thickness of the mattr
ess has been specified to ensu
re that the distance from the top
of the mattress to the top of the lowest side or end will always be at least 500mm. This will
reduce the risk of children falling out of the cot.
.
Always check parts regularly for tightness of screws, nuts and other fasteners - tighten
if required.
.
Use only the mattress supplied with the cot.
.
Do not use an additional mattress, padding, toys or other objects in the cot which would
help your child fall out.
.
Using the wrong size mattress may create hazardous gaps that could result in suffocation
or could reduce the side height of the cot, which may result in your child falling out
of the cot.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
11
www.britax.com.au
www.britax.com.au
CARE AND MAINTENANCE
To prolong the life of your nursery product keep it clean and do not leave it in the direct
sunlight for extended periods of time.
Removable fabric covers and trims may be cleaned using warm water with a household
soap or a mild detergent. Allow it to dry fully, preferably away from the direct sunlight.
DO NOT DRY CLEAN, OR USE BLEACH.
Do not machine wash, tumble or spin dry, unless the care labelling on the product permits
these methods.
Non removable fabric covers and trims may be cleaned using a damp sponge with soap
or mild detergent. Allow it to dry completely before folding or storing it away.
In some climates the covers and trims may be affected by mould and mildew. To help
prevent this occurring, do not fold or store the product if it is damp or wet. Always store
the product in a well ventilated area.
To maintain the safety of your nursery product, seek prompt repairs for bent, torn, worn
or broken parts. Use only those parts and accessories tested and approved
by Steelcraft.
WARNING: IF THE SIDES DO NOT LATCH FIRMLY OR THERE ARE HOLES IN THE
MESH SIDES, DISCONTINUE USE IMMEDIATELY AND SEEK REPAIR.
TESTED AND APPROVED ACCESSORIES
Mattress by Steelcraft
- series R032S
Bassinet by Steelcraft
- series R032S
Change Table by Steelcraft
- series R032S