BOOT COVER (where fitted)
A Boot Cover (where fitted) provides shade
from the sun and protection from wind
whilst the Infant Carrier is installed on the
Travel System Stroller.
DO NOT USE the boot cover on the carrier
whilst installed in the car as it will prevent
the quick release of a baby in a crash.
Boot Cover
ACCESSORIES
ACCESSORIES
OTHER ACCESSORIES
Only use accessories designed for this product and recommended by
Britax Childcare Pty Ltd.
38
39
BUCKLE PAD (where fitted)
A. To fit the buckle pad, grasp the loop at the
base of the buckle pad and pull over the
harness buckle as shown right.
B. To remove, simply slide the buckle pad
off the harness buckle.
SHOULDER PADS (where fitted)
A. The shoulder pads may require release by press
studs. If fully fitted to the shoulder strap then you will
need to disconnect the shoulder strap as described
on page 18.
EXTRA BASE
There are Steelcraft Extra Bases available as a separate purchase for
a second car. These bases can mean that the Carrier can be easily
and quickly switched between cars. The Extra Base has the same
installation requirements as the Base in these instructions.
