Britax Hippo Instruction Booklet Download Page 10

Cleaning the Harness Adjuster

Periodically check the adjuster area to be sure it is clean and free of 
food, coins, dirt, and other objects. If debris is present, it must be 
removed to prevent interference with the adjuster mechanism. 

BRUSH AWAY LOOSE DEBRIS, using a soft bristled brush.
SPONGE CLEAN, using warm water and mild soap.
TOWEL DRY.

Do not:

 Use solvents, abrasive cleaners, or disassemble the harness.

Buckle Removal 

1 Fully recline the child restraint.
2 Locate the metal buckle strap 

retainer on bottom of the 
restraint.

3 Pull retainer away from child 

restraint to loosen.

4 Turn the retainer so that the 

short side will go through the slot in the restraint shell (Fig. A).

5 Push the retainer through slots in the shell and cover to the front 

of the restraint.

Rethreading the Buckle

1 Locate the buckle slot.
2 Turn the buckle retainer so that the short side will go through the 

slot in the cover and restraint shell (Fig. A).

3 Pull buckle away from restraint until tight, then verify that the 

strap is not twisted and the release button is facing outward.




A

A

Care and Maintenance 

38

Cleaning the Buckle

If a child eats and drinks while in the restraint, the buckle may need 
to be periodically checked and cleaned of any accumulated debris or 
dried liquids.

THOROUGHLY RINSE, using 
warm water (Fig. B).
SOAK, overnight if possible, 
using warm water to loosen 
hardened drinks or food.
TEST THE BUCKLE, by fastening 
and unfastening until a positive 
click is heard after inserting 
second buckle tongue 
(Fig. C). If click is not heard, 
repeat cleaning procedure.
TOWEL DRY.

Do not:

 Lubricate, use solvents, 

abrasive cleaners, soap or 
household detergents.


B

B

C

C

Care and Maintenance

39

This restraint was distributed by Snug Seat

®

. Snug Seat warrants this product to 

the original purchaser as follows:

LIMITED ONE-YEAR WARRANTY 

This product is warranted against defective materials or workmanship for one 
year from the date of original purchase. Proof of purchase is required. The 
exclusive remedy for this warranty is that Snug Seat will, at its option, provide 
repair or replacement components for this product or refund the original 
purchase price of the product. Snug Seat reserves the right to discontinue or 
change fabrics, parts, models or products, or to make substitutions.

To make a claim under this warranty, contact Snug Seat, Inc. Consumer Services 
at  1-800-336-7684 or write to: Snug Seat, Inc., PO Box 1739, Matthews, NC 
28106. 

Proof of purchase is required.

PLEASE COMPLETE AND MAIL THE OWNER REGISTRATION CARD 
WITHIN (30) DAYS OF PURCHASE.

WARRANTY LIMITATIONS 

This warranty does not include damages which arise from negligence, misuse or 
use not in accordance with the product instruction.

The use of non-Snug Seat covers, inserts, toys, accessories, or tightening devices 
is not  approved by Snug Seat. Their use could cause this restraint to fail Federal 
Safety Standards or perform worse in a crash. Their use automatically voids the 
Snug Seat warranty. 

LIMITATION OF DAMAGES 

The warranty and remedies as set forth above are exclusive and in lieu of all 
others, oral or written, express or implied. In no event will Snug Seat, or the 
retailer selling this product, be liable for any damages, including incidental or 
consequential damages, arising out of the use or inability to use this product.

LIMITATIONS OF WARRANTIES AND OTHER WARRANTY TERMS AND STATE LAWS 

Any implied warranties, including implied warranties of merchantability and 
fi tness for a particular purpose, shall be limited to the duration and terms of the 
express written warranty. Some states do not allow limitations on how long an 
implied warranty lasts or the exclusion or limitation of incidental or consequential 
damages, so the above limitations may not apply. This warranty gives you specifi c 
legal rights, and you may have other rights, which vary from state to state. 
Neither Snug Seat, nor the seller of this product, authorizes any person to create 
for it any other warranty, obligation, or liability in connection with this product.

Warranty Information 

40

Page 10 of 10  Britax / Snug Seat  Hippo  (5/07) 

Summary of Contents for Hippo











Reviews: