Britax FRONTIER, Owner'S Manual

Page: 31 / 60

29
Harness Mode
Pull the vehicle belt out. Route the lap
5
portion of the belt over the red lap belt
guide, while positioning the shoulder
portion of the belt inside the child seat
shell, behind the head restraint.
Do NOT route the shoulder *
portion of the vehicle seat belt
through the red shoulder belt
guide on the head restraint.
Rejoin the lap and shoulder belt portions
6
of the vehicle belt, route through the
belt slot to the back of the child seat,
across the back of the child seat shell,
then through the second belt slot to the
front of the child seat.
Route the vehicle belt over the red
7
belt guide around to the outside of the
child seat. Verify the vehicle belt is not
twisted, then buckle.
Push the child seat firmly into the
8
vehicle seat while removing all slack
from the lap portion and then from the
shoulder portion of the vehicle belt.
NOTE: Verify that the vehicle belt is tight and the child seat is secure. The child seat is
secure when it cannot be moved front-to-back or side-to-side more than 1” (2.5 cm.)
at the belt path. If the child seat is not secure, repeat the installation procedure or use
a different seating location.
Attach and tighten the Versa-Tether.
9
IMPORTANT: Ensure that any excess Versa-Tether
®
webbing is contained within
your vehicle.
Harness Mode: Installing Your Child Seat