manualshive.com logo in svg

Britax Encore 10, Instructions For Installation And Use Manual, Page: 34 / 44

Share
Download
Britax Encore 10 Instructions For Installation And Use Manual Download Page 34

Instructions for Installation & Use - Series No. 4900/A/2010

34

C.

  Replace middle cover, tuck in 

plastic flaps from both ends 
of the booster wings (see 
illustration).  Do not loop elastic 

at the bottom of the middle cover 
over the booster seat, this is 
placed at the front of the middle 
cover. Feed elastic through the 

wings (see illustration). Insert 

cover into the channel running 
along the edge of the wings.

B.

  To replace headrest, adjust the headrest height 

to the highest position. Pull elastic over the air 
cushions and tuck behind. Attach the elastic 
loops to the hooks at the back of the red sash 

guides. Refit cover around headrest. Ensure that 

the headrest is tucked in the channel around the 
red sash guides, so that the sash guide text is 
clearly visible.

TO REPLACE COVER

A.

  To replace base cover, Slide on base cover and 

feed through SLIDEGUARD™clip and the knob 
then loop elastic over the back of the base.

Tuck Plastic 
Flaps in slots  

Replace elastic from 
behind air cushion   

Hook elastic behind headrest   

Feed the 
SLIDEGUARD™clip 
through slot

Feed the knob 
through slot

D. 

Replace cup holder if needed.

A

C

B

Hook elastic from underneath booster  

A

Feed cover 
into channel  

C

Tuck Plastic 
Flaps in slots  

CARE & MAINTENANCE

Summary of Contents for Encore 10













































Reviews:

No comments