CARE & MAINTENANCE
TO CLEAN HARNESS BUCKLE:
If sticky liquids such as baby formula, fruit juice, etc. get inside your Harness Buckle, it
may become sluggish. An indication of a sluggish Harness Buckle is that you cannot hear
a click when engaging the Harness Tongues. To restore the Harness Buckle to good
working order it needs to be cleaned as follows:
REGULAR CARE OF THIS RESTRAINT:
A.
B.
C.
D.
E.
Please check the following items regularly to ensure the safety of your child:
Check the webbing for fraying.
Check that the buckle clicks and is not sluggish or sticky in operation.
Ensure there are no cracks in moulding or the plastic moulding.
Check the Harness Adjuster is operating and is clamping the webbing.
If any part of the restraint is cracked or broken, seek repair immediately or replace the
child restraint.
C.
Tongues and Buckles several times until a
strong audible click is heard.
Engage and disengage the Harness
B.
Place the Harness Buckle under warm
(approx. 40 degrees Celsius) running water as
shown below. Let the water run through the
mouth of the buckle for five minutes.
D.
E.
If you still cannot hear a strong audible click after engaging the Harness Tongues &
Buckle, then repeat cleaning several times. If the Harness Buckle cannot be returned
to its original working condition then contact Britax Childcare.
Refit the Harness Buckle to the restraint with the red button facing out & feeding each
3-bar slide through appropriate slot.
B
Click
C
23
Forward & Rearward Facing
Cover
Body
3-bar
A.
From the underside of the restraint pull each crotch 3-bar slide then turn 3-bar slide and push
through each slot to remove the Harness Buckle from the restraint.
A
RETRACTOR HARNESS MODELS
Crotch 3-bar slide
A
Access to the crotch
3-bar slides is
restricted on this
model therefore use
the tips of your
fingers to
manipulate the 3-
bar slides through
the slots.
