Britax CLICKTIGHT, Canadian User Manual

Page: 26 / 100

24
NOTE: If the child restraint does not meet the above criteria,
repeat the installation steps or use a different seating
location in your vehicle.
FORWARD-Facing Installation Harness Mode
IMPORTANT:
The top tether must be used at ALL times when
installing the child restraint FORWARD -facing. Using the top
tether will improve the stability of your child restraint and
reduce the risk of injury.
Britax strongly recommends:
Use
FORWARD -facing only:
• with harness straps in
closest position above the
child’s shoulder, and
• with children weighing 10 - 30 kg
(22 - 65 lb.), and
• who are 125 cm (49 in.) or less in
height, and
• when the top of the ears are below
the top of headrest.
WARNING!
Anti-rebound bar MUST be removed forward-facing.
Vehicle Lap-Shoulder Belt (Preferred Method)
1. Extend the top tether
strap by lifting on the
top tether adjuster.
2. Unhook the top tether
hook from the back of
the child restraint and
place it up and over the
seatback.
9
Both red CLICKTIGHT release buttons are visible after installation.
9
All connections are secure and vehicle belt is not twisted.
9
Vehicle belt is locked as directed by your vehicle owner’s manual.
9
Base of child restraint sits flat on vehicle seat.
9
Recline indicator is still within the correct section for REAR-facing
after child is secured.
9
Child restraint cannot be moved front to back or side to side more
than 2.5 cm (1 in.) at the belt path.
9
Excess top tether webbing is contained within your vehicle and secured
9
Anti-rebound bar installed.