Britax CLICKTIGHT PINNACLE, User Manual

Page: 20 / 54

34 35
10
Buckle the harness and pull
the adjuster strap to tighten the
harness.
* Pull the harness adjuster away
from the child seat (parallel to
the ground) to tighten.
IMPORTANT: Check all attachments before using the child seat.
7
Nest the harness straps by
inserting the right strap loop
into the left strap loop.
8
Remove the harness yoke
from storage underneath the
seat shell and slide the nested
harness straps completely onto
the harness yoke.
9
Close the CLICKTIGHT.
* A click confirms the
CLICKTIGHT is secure.
Booster to Harness Mode: Replacing the Harness and Buckle
1
Open the CLICKTIGHT.
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
5
Hook the harness straps to the
CLICKTIGHT hip anchors.
* Ensure that the harness is
attached to the top of the
hip anchor.
6
Insert the harness straps
through the slots in the cover
and shell, and over the harness
adjuster plate to the back of the
child seat.
IMPORTANT: Select the slot
closest to, but not under the child.
3
Turn and push the buckle
retainer through the slot in the
child seat shell.
4
Pull the EZ-Buckle belly pad
through the corresponding
slot in the seat cover. Place
the seat cover back in its
original position and attach
the retaining clips.
2
Unhook the retaining clips at
the back of the seat cover. Pull
the seat cover forward.
Switching Between Modes Switching Between Modes