38
39
Buckle Removal
Locate the metal buckle strap
1
retainer on the bottom of the child
seat.
Pull retainer away from child seat to
2
loosen.
Turn the retainer so that the short
3
side will go through the slot in the
child seat shell (Fig. A).
Push the retainer through slots in
4
the shell and cover, to the front of the child seat.
NOTE:
Pull the belly pad over the metal buckle retainer to remove.
Rethreading the Buckle
Locate the necessary buckle slot.
1
Turn the buckle retainer so that the short side will fit through the slot
2
in the cover and child seat shell (Fig. A).
Push the retainer through the slots in the cover and shell to the
3
bottom of the child seat.
Pull buckle away from the child seat until tight, then verify that the
4
strap is not twisted and the release button is facing out.
Verify that the buckle retainer lies flat against the the child seat shell.
5
Cleaning the Buckle
If your child eats and drinks while in the child seat,
you may need to check the buckle periodically and
wash out any accumulated debris or dried liquids.
THOROUGHLY RINSE, using warm water (Fig. B).
•
SOAK, overnight if possible, using warm water to
•
loosen hardened drinks or food.
TEST THE BUCKLE, by fastening and
•
unfastening until a positive click is heard after
inserting the second buckle tongue (Fig. C). If
click is not heard, repeat cleaning procedure.
TOWEL DRY
•
DO NOT:
Lubricate, use solvents, use soap or
household detergents.
A
b
c
Care and Maintenance
Care and Maintenance
