manualshive.com logo in svg

Britax 25/C/2004 Series, Instructions For Installation & Use, Page: 22 / 28

Share
Download
Britax 25/C/2004 Series Instructions For Installation & Use Download Page 22

HOW TO CLEAN

Harness 

Adjustment 

Strap.

The restraint has a flame retardant cover which is removable for cleaning. Cleaning 
instructions are on the care label attached to the cover. If fluffy cover is fitted then washing 
cover prior to use will remove excess fluff. Ensure that the inside of the buckle is free of 
foreign matter. Cleaning instructions are on page 23. Use only mild soap and water to clean 
all metal and plastic parts of the restraint.

Remove the restraint from vehicle as instructed on page 6.

Disengage harness tongues from harness buckle.

Remove any accessories, if fitted as instructed on page 24.

Disengage harness straps from harness Strap Connector as instructed on page 

17, item B.

  Unhook the cover at the top and bottom of the restraint. Peel cover from outer rim  of 

the body starting from       on both sides and then at       , at the top.

Remove the cover while feeding the Harness Tongues & Crotch Buckle through the

lap and crotch strap slots in the cover.

Feed  the  Harness  straps  and 

Harness  Tongues  through  Lap 
Strap  Slots  and  through  matching 
shoulder  strap  slots  in  the  cover 
and  seat.

Stretch  cover  over  the  top  of  the 
restraint  first  at         then  the  sides  at, 

as  instructed  above  and  then  stretch  the 

cover  around  the  rim  of  the  restraint. 

Re-fit  the  Seat  Cover  attachments.

Re-engage  harness  straps  to  Harness 
Strap  Connector  as  instructed  on  page 

17,  item  D  to  F.

Feed  Crotch  Buckle  through  slots  in  cover.

The cover has been designed to protect your child 
when seated in the restraint. Care should be taken if 
children either eat or drink while in the restraint as 
some food or drink products may cause damage or 
marking to the cover.

 

TO  REMOVE  COVER:

TO  REPLACE  COVER:

A

A.

B. 

C. 

D. 

E.

F.

 

.

B.

C.

D.

E.

COVER

 

(STYLE MAY VARY)

Do not remove Harness Adjustment Strap from Harness Adjustment Strap Lock.

IMPORTANT: Do not pull sticky items from covers as the cover may be damaged - soak in 
water and gently remove.  

Shoulder

Strap Slots 

Forward & Rearward Facing 

22

Summary of Contents for 25/C/2004 Series





























Reviews:

No comments