ENGLISH
11
C
Leak
Cause:
Screwed connections not fi tted correctly.
Troubleshooting:
Check mains pressure. Check all screwed
connections in accordance with chapter 3.4.
D
No LED indication by usage
Cause:
Battery is not inserted in a correct way or is
used up.
Troubleshooting:
Check if battery is inserted properly. If neces-
sary, replace the battery.
For models WD 3030 and WD 3040 only
These models have an aerator with two integrated outlets. The
Inner one is for BRITA fi ltered water, the outer area for hot and cold
water.
8
Technical data of the A 1000 cartridge
Operating pressure
0.1 MPa to max. 0.36 MPa
Water intake temperature
4°C to 30°C
Ambient tem-
perature during
operation
4°C to 40°C
storage/transport
–20°C to 50°C
Working fl ow range and associated
pressure loss
30–180 L/h /
0.2–1.4 bar
Working fl ow range and associated
pressure loss
30–180 L/h /
0.02–0.14 Mpa
Bed Volume
0.23 L
Weight (dry/wet)
0.4 kg/0.9 kg
Chlorine reduction NSF 42
Class I (50 %)
Particle retention NSF 42
Class I (0.5 μm)
Chlorine reduction DIN EN 14898
Class 1 (>90 %)
Dimensions
(Width/Depth/
Height)
Filter system (fi lter
head with fi lter car-
tridge)
106 mm/92 mm/232 mm
Filter cartridge
86 mm/86 mm/224 mm
Installed dimensions
(vertical installation
with wall mounting)
137 mm/122 mm/232 mm
Operating position
Horizontal and vertical
Water inlet connection
G3/8"
Water outlet connection
G3/8"
Filter performance
Independent laboratory
test* reduction effi ciency
at least 97 % of following
substances, measured at
4000 L. Chlorine Bromo-
form Bromodichlorometh-
ane Tetrachlorethylene
Dibromochloromethane
Trichloroethylene
1014663-001_GA_BRITA_Tap_AU.indb 11
1014663-001_GA_BRITA_Tap_AU.indb 11
28.04.15 15:25
28.04.15 15:25
