ENGLISH
3
1
Thank you
Thank you for choosing this BRITA filter tap. To ensure that you
enjoy all the benefits of great tasting BRITA water on demand,
please follow all the installation, operating and servicing instruc-
tions carefully before installing.
I. Introduction
filter cartridge
3-way water
filter tap
Design may differ from
image shown
7. Flexible hose to filter system
8. Usage Instructions
9. Water hardness testing strip
10. T-piece
11. 2 Adapter 1/2" female thread to 3/8" male thread (Only in UK)
Recommended tools for installation: one Allen hexagonal key (4 mm),
a pipe wrench with adjustable spanner or a 19 mm and 26 mm span-
ner, a screwdriver, optional sealing tape (for pressure limiting valve).
For wall mounting the cartridge (optional), you need: two screws
(e.g. 5 mm in size) and two wall plugs (if necessary).
Please use appropriate screws and wall plugs for the type of wall in
the under-sink compartment.
3
Warranty
The mypure filter tap is subject to the statutory guarantee of
2 years. A guarantee claim may be asserted only if all instructions in
this handbook are followed and observed.
Any warranty claims will be voided if defective installation is
deemed to have contributed to malfunction. Installation needs
to take place in accordance with the instructions and all relevant
plumbing codes and standards.
Before starting, please check that you have all the components as
listed above (see fig. 1) as well as the recommended tools.
There are 7 steps to the installation.
!
Installation of the filter system must comply with the
relevant state or local plumbing regulations and standards.
!
Prior to installation, read the Technical Data (chapter 6) and
the Operation and Safety Information. (After storage and
transport below 0°C, the product must be stored in the open
original packaging for at least 24 hours at the stated ambient
temperatures (chapter 6.1) for operation.) The system cannot
be installed with a low pressure boiler.
The
2
Parts included
Your mypure filtration system includes the following
(see fig. 1):
1. Filter head with settings ("A", "B", "C" and "0") including a convenient
locking handle
2. Flexible wall mount bracket for filter head
3. Filter cartridge
4. 3-way water filter tap (design may differ from image shown)
5. BRITA Cartridge Status Indicator
6. Battery (CR2032)