Setting of the time
1.Unscrew anticlockwise the crown B to reach the position 1.
2.Pull the crown B in position 3. The movement is then
stopped (« stop second » function). Move the hands clockwise
until the desired time.
3.Push again the crown B into position 1. Then screw back
the crown against the case by turning it clockwise in order to
preserve the water resistance of your watch. The second hand
starts again when the winder is pushed back into its normal
position.
crown B
crown A
3rd
position
Setting the date
1.Unscrew anticlockwise the crown B situated at 4 o’clock to
reach the position 1.
2.Gently pull the winder out (crown B) into the position 2. Turn
the winder (crown) anticlockwise to set the date.
3.Push again the crown B into position 1 & screw down the
crown against the case by turning it clockwise in order to
preserve the water resistance of your watch.
The watch is now working again.
never make a date correction when the watch shows a
time between 10 PM and 2 AM. the automatic mechanism
of date change is activated during this period of time and
the movement could be damaged.
2nd
position