Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
6-10
Insert flap actuator (4) in to the actuator hinge (6).
Connect actuator wire (5).
Connect the flap actuator (4) with the flap lever (3).
Check the flap operation and deflections (see 6.4.3.2).
Insert glove box in the center console.
6.3.6
Removal of the trim tab control actuator
Type of maintenance: heavy
Authorization to perform:
LSA mechanic or A&P mechanic (Airframe and Power plant)
Tools needed:
wrench size 5
screwdriver
wire nippers, pliers
The trim tab control actuator is located in the elevator and the left aileron (see Fig. 6-9).
Remove the cover (1) from the access hole (2).
Disconnect the trim tab actuator wires (3).
Disconnect the actuator rod end (4) from the trim tab lever (5).
Disconnect the actuator (6) from the elevator or aileron skin.
Remove the actuator (6) from the elevator or aileron through access hole (2).
Fig. 6-9
Trim tab control actuator
1 - Cover
2 - Access hole
3 - Trim tab actuator wires
4 - Actuator rod end
5 - Trim tab lever
6 - Trim tab actuator
Summary of Contents for S-LSA
Page 2: ......
