1. Identify all components and check for completeness, particularly before
commencing installation.
2. Fit the waste body (4) and foam washer (5) to the sink.
3. Fit the foam washer (6) underneath of the sink as shown on the diagram, secure
by tightening the backnut (7).
Use a pure silicon sealant where necessary.
4. Fit the stay (1) to the sink.
5. Check all joints and connections for leaks.
6. See the back page for aftercare instructions
PLEASE NOTE:
In the unlikely event you find a part missing, please contact our Customer Service
helpline on
0844 701 6273
for immediate dispatch of part
N.B. Before installation, please write the name and product code of your
fitting in the spaces provided overleaf. This will ensure a speedier service if
you should need to phone the helpline.
INSTALLATION
SINK
5
7
6
4
3
2
1
WORK TOP
COMPONENTS
1. Sink Stay
2. Chain Assembly
3. Plug
4. Waste Body
5. Foam Washer
6. Foam Washer
7. Backnut