Bristan GLE3105 B Installation Instructions And User Manual Download Page 22

Guarantee 

Thank you for purchasing a Bristan product. This 

product has been designed and tested, in the UK, to 

the highest standards.

Guarantee: 2 Year parts. 

 1 Year labour (subject to registration). 

This guarantee applies to products purchased within 

the United Kingdom or Republic of Ireland, but does 

not apply to products used commercially.

This is provided that:

1. The guarantee registration card is completed and 

returned within ten days complete with a copy of 

proof of purchase. Proof of purchase is required for 

any servicing requirements.

2. The product is installed and operated in 

accordance with our instructions, the I.E.E Wiring 

Regulations, and Building Regulations (Part P), and 

has not been misused or damaged.

This in no way affects your statutory rights as a 

consumer. 

The information on the Guarantee card helps Bristan 

to process any claims and contact you about 

your product and its maintenance if required. The 

registration of your personal details is purely for 

Bristan use and the remaining information helps us 

to make products for the future.

Should a complaint arise, products are guaranteed 

against faulty workmanship and materials for a 

period of 12 months from the date of purchase, 

when in domestic use (second year guarantee is 

parts only). For your guarantee to be valid, your 

shower must be installed by a competent person, in 

accordance with the instruction manual. 

Bristan will repair or replace (at our option), free of 

charge, any faulty components during the guarantee 

period, provided it has been maintained and 

operated in accordance with our instructions, and 

has not been misused or damaged.

Modification or repair of this product by person(s) 

not authorised by Bristan will invalidate this 

guarantee.

This guarantee does not affect your statutory rights.

Service Policy 

Replacement Parts Policy

Important: 

In the event of product or component malfunction,  

DO NOT tamper with or remove the product from 

site. Telephone the Customer Services Department 

and be prepared with the date of purchase, model 

number and a clear description of the complaint.

Our service staff are fully qualified to advise 

on correct installation procedures and will be 

able to diagnose whether the fault will require a 

replacement part or a visit from a Bristan engineer.

If required, a service call will be booked and either 

yourself or an appointed representative (who 

should be a person of 18 years or over) must be 

present during the visit. 

All site visits to product within the guarantee period 

will be carried out free of any parts or labour 

charges provided the conditions of the guarantee 

have been adhered to (the second year guarantee 

is parts only).

All site visits to product out of guarantee will be 

subject to charges for parts and labour. Charges will 

also be levied on cancelled appointments, unless 

advised to Bristan at least 24 hours in advance of 

the agreed date and time.

Should a product be discontinued, spare parts 

stocks will be maintained, but in the event of a part 

becoming unavailable Bristan reserve the right to 

supply a substitute of equal quality.

Please visit: www.bristan.com/search and search for 

your product code in order to find spare parts for 

this product. 

Opening times: Please refer to the Bristan website.

Customer Service: 

Tel: 0330 026 6273
E-mail: [email protected]

22

Need help?

 Give us a call on

 0330 026 6273

 and speak to one of our trained advisors.  

Guarantee

Summary of Contents for GLE3105 B





























Reviews: