BRISTA
Introduction
Thank you for choosing Bristan, the UK's leading taps and showers expert. We have designed this product with
your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the information you need and, if you need any further help, please
do not hesitate to give us a call on 0844 701 6273.
Safety Note
Please read these instruction thoroughly and retain for future use.
All product manufactured and supplied by Bristan are safe provided they are installed correctly, used correctly and
receive regular maintenance in accordance with these instructions.
These fittings need to be installed in accordance with and meet the requirements of the Water Supply [Water
Fittings) Regulations 1999 and Scottish Byelaws 2004.
Specification
225
Min.
Max.
Operating pressure range [bar)
Maximum Static pressure - 10.0 bar
0.2
0
"'
1
NOTE:- Nominally equal [balanced) inlet supply
pressures are recommended for optimum
performance.
Installation
1.
Identify all components and check for completeness, particularly
before arranging fitting.
2.
Fit the spout to the body
3.
Fit the mixer to the sink using the washers and backnuts
provided.
4.
Fully open both valves, letting them run for a
few minutes to flush out the system.
5.
Check all joints and connections for leaks.
STAY
CHAIN
8.0
