Gas Cylinder Warmer (GCW & HCW Series)
BriskHeat
®
Corporation. All rights reserved.
Gas Cylinder Warmer (GCW & HCW Series)
BriskHeat
®
Corporation. All rights reserved.
WARRANTY INFORMATION
The BriskHeat Corporation (hereinafter referred as (“BriskHeat”) warrants to the original
purchaser for the
period of eighteen (18) months from date of shipment or twelve (12)
months from date of installation
, whichever comes
fi
rst, that the products manufactured
by BriskHeat: (A) conform to the description and speci
fi
cations as set forth in BriskHeat’s
current catalogue or in the quotation and drawings submitted by BriskHeat: and (B) are free
from defects in materials and workmanship under prescribed use and service.
Remedy. BriskHeat’s obligation and the exclusive remedy under this warranty shall be
limited to the repair or replacement, at BriskHeat’s option, of any parts of the product which
may prove defective under prescribed use and service within eighteen (18) months from
date of shipment or twelve (12) months from date of installation, whichever comes
fi
rst,
and which, following BriskHeat’s examination, is determined by BriskHeats to be defective
under conditions described herein: provided, BriskHeat has, at its option, a representative
of BriskHeat present at start-up. BriskHeat shall not be liable for any incidental,
consequential or special damages arising from any breach of warranty, breach of contract,
negligence, or any other legal theory, including but not limited to, loss of use of parts or
equipment or any associated equipment, cost of capital, cost of any substitute equipment,
facilities or services, overhead, downtime costs, or claims of customer of purchaser for
such damages. This remedy does not include labor costs for installation or removal of the
equipment or parts covered by this warranty, and BriskHeat shall not be responsible for
such labor costs.
Limitation. This warranty shall not apply to any product or part thereof which has been
subject to accident, negligence, alteration, damage during shipment, improper service,
abuse, or misuse, including but not limited to use beyond rated capacity. BriskHeat makes
no warranty whatsoever with respect to accessories or parts not supplied or manufactured
by BriskHeat. BriskHeat’s obligation under this warranty shall be conditioned upon
BriskHeat’s receiving written notice of any defect within
fi
fteen (15) days after its discovery,
and, at BriskHeat’s option, return of such equipment or parts prepaid to its factory at 1055
Gibbard Ave., Columbus, Ohio 43201.
Disclaimer.
BRISKHEAT MAKES NO WARRANTY WHATSOEVER, EXPRESS OR
IMPLIED, EXCEPT AS IS EXPRESSLY SET FORTH ABOVE. NO AGENT, EMPLOYEE
OR REPRESENTATIVE OF BRISKHEAT HAS ANY AUTHORITY TO BIND BRISKHEAT
TO ANY AFFIRMATION, REPRESENTATION OR WARRANTY COVERING THE
SALE OF ANY PRODUCT, AND UNLESS SUCH AFFIRMATION, REPRESENTATION
OR WARRANTY MADE BY AN AGENT, EMPLOYEE OR REPRESENTATIVE IS
SPECIFICALLY ENDORSED IN WRITING BY BRISKHEAT, IT SHALL NOT BE
ENFORCEABLE BY ANY BUYER. BRISKHEAT MAKES NO EXPRESS OR IMPLIED
WARRANTY OF MERCHANTABILITY AND NO EXPRESS OR IMPLIED WARRANTY
OF FITNESS FOR PARTICULAR PURPOSE, EXCEPT AS IS EXPRESSLY SET FORTH
ABOVE. BRISKHEAT SHALL NOT BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL
OR SPECIAL DAMAGES.
This warranty allocates risk between the purchaser and BriskHeat as authorized by the
Uniform Commercial Code and other applicable law.
7
TROUBLESHOOTING GUIDE
Please read this guide prior to contacting BriskHeat
®
. This guide is designed to
answer the most commonly asked questions. If you are unable to identify the
problem or need additional assistance, please contact your
local distributor/ representative or us at
1-800-848-7673
,
614-294-3376
, or
.
6
PROBLEM
SOLUTION(S)
Does not heat
Verify heater is connected to proper voltage. The
identi
fi
cation label located on the power cord indicates
the heater’s voltage requirement.
Check to see if there is a resistance reading (not an
open circuit) in heater using an ohm meter.
Circuit breaker is tripping
Validate that the circuit breaker is capable of handling
the amp requirement of heater. The identi
fi
cation
label located on the power cord indicates the heater’s
amperage requirement.
Examine heater and cord for any damage.
Does not
fi
t
Con
fi
rm that the heater provided was designed to
fi
t
around your speci
fi
ed gas cylinder.
If the heater was not designed for the speci
fi
ed gas
cylinder, please call 1-800-848-7673 or 614-294-3376
for further assistance.
Something has lightly spilled on exterior
or interior
Apply any general household cleaner, that does not
contain any silicone rubber dissolving type
ingredients, with a clean cloth fabric.
