12
Ductless recirculation is intended for applications where an exhaust duct work is not possible to be installed.
When converted, the hood functions as a recirculating hood rather than an exhaust hood. Fumes and exhaust
from cooking are drawn and filtered by a set of optional charcoal filters. The air is then purified and re-
circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new duct
work, if possible. The hood is most effective and efficient as an exhaust hood. Only when the exhaust option
is not possible should you recourse to converting the hood into a recirculating hood.
When converted to be a recirculating hood, a set of charcoal filters are required on top of its standard mesh
filter set. Order according to its part number below. The standard mesh filters are intended to capture residue
from cooking and the optional charcoal filters help to purify fumes exhausted from cooking for re-circulation.
RECIRCULATING KIT (REQUIRED IF NO DUCTING IS USED)
Hood Model
Part No. Filters in Pkg.
BMI BRC-0006 1
BVE
BRC-0008
2
1. Purchase recirculating kit per the part number above.
2. Secure air diverter plate to wall below duct cover bracket. (FIG. C)
Run 6” ducting from top of hood and secure to air diverter plate.
3. Remove the aluminum mesh filter(s) from hood. Secure the charcoal
filters to the back side of mesh filter by 3 holding brackets for each
filter. (FIG. C)
4. Re-Install mesh filters.
5. Charcoal filters must be replaced after every 120 hours of use (or
approximately every 3 to 4 months based on the average of 1 - 2 hrs.
of daily cooking time).
Note:
Refer to manual included with recirculating kit for more detailed
installation instructions.
Charcoal Filter Replacements
Hood Model
Part No. Qty to Order
BMI
Z0F-C093
1
BVE
Z0F-C091
2
DO NOT WASH CHARCOAL FILTERS. Charcoal filters may need
to be changed more often depending on cooking habits.
Installation –
Ductless Recirculating
FIG. C
Summary of Contents for BMI-E30CG
Page 2: ......
