BrioConnect™ Gateway – Quick Start Guide
www.briowireless.com
Copyright © 2018 Briowireless Inc. All rights reserved.
14
5.
LED
The following table describes the states of the LEDs located at the front of the unit.
LED
Name
State
Details
STAT
Steady Green
The power is present, and device is running normally.
Steady Orange
Device is booting.
Flashing Orange
Device is performing a firmware upgrade.
Flashing Red
The LED flashes 3 times to indicate that the device has being
reset to Factory Default settings. This happens when the
Factory Reset button is pressed for about 20 seconds after the
device power up.
Steady Red
A problem is encountered during boot. The device needs to be
reset.
CELL
Steady Green
Cellular data connection is established.
Flashing Green
Cellular data activity. Data is being transferred to/from cellular
network.
Steady Orange
Cellular network connected, but no data communications
available. The unit is trying to establish data connection.
Steady Red
Fault in data connection or no cellular network connection.
This also includes SIM card errors.
Off
Device is booting, network registration has not started yet.
LINK
Green
RSSI - strong signal
Orange
RSSI - medium signal
Red
RSSI - weak signal
Off
There is no cellular connection, or in case of connection error.
Flashing
Twice periodically
2G cellular access
3 times periodically
3G Cellular access
4 times periodically
4G (LTE) Cellular access