
Single Mode
To pair with your device (phone, tablet, etc.), please
turn on your device’s Bluetooth feature and follow
device instructions to pair with BRIONVEGA WEARiT.
For Android Users:
Go to: SETTINGS > BLUETOOTH
Turn on Bluetooth
The device will automatically search for Discover-
able Devices. If not, press SEARCH FOR DEVICES.
Select BRIONVEGA WEARiT and the device will
automatically connect to the speaker. It will then in-
dicate that it is connected to BRIONVEGA WEARiT.
For iOS (iPhone/ iPad) Users:
Go to: SETTINGS > BLUETOOTH
Turn on Bluetooth
The device will automatically search for Discover-
able Devices. If not, press SEARCH FOR DEVICES.
Select BRIONVEGA WEARiT and the device will
automatically connect to the speaker. It will then in-
dicate that it is connected to BRIONVEGA WEARiT.
Attention
: When powered on the BRIONVEGA
WEARiT will automatically search for a second WEA-
RiT to enable “Stereo Mode” (see following para-
graph), please wait for 10 seconds before you con-
nect your speaker to your device using Bluetooth.
Power Port
E.-
The USB Type-A port is a DC-5V1A power out-
put. It can be used to charge compatible devices
(samrtphones, tablets, etc.). When in use, a blue and
red light will blink, indicating that charging of the
external device is in progress.
F. -
The Micro USB port is DC-5V1A power input. It
is should only be used to charge the WEARiT. When
WEARiT is charging, a red light will blink. When it is
fully charged, the red light will stop blinking.
G. AUX IN
The AUX IN takes priority over Bluetooth connection.
The AUX IN is used to connect WEARiT to other de-
vices via a suitable connecting cable.
Note:
AUX IN takes priority over Bluetooth in play
mode. If AUX IN is connected during Stereo Mode
use, each WEARiT will default to Single Mode.
Microphone
WEARiT is equipped with a built-in microphone that can
be used to make calls with a telephone connected via
Bluetooth. When two WEARiT are paired in Stereo Mode,
the microphone will be active on the Master unit only.
Auto Power off
When there is no music stream is detected, or the
AUX IN is disconnected, the WEARiT will auto-
matically power-off after 15 minutes. To turn on the
speaker again follow the “Power On/Off” procedure.
10
9
Micro
USB
USB
User manual
Manuale d’uso
Certificato di garanzia
Master
Slave
RIGHT
LEFT
Principale
Secondario
DESTRA
SINISTRA
Connect with
BRIONVEGA
WEARiT
USB
Micro USB
AUX IN
1
7
5
6
A
B
C
D
G
E
F
2
3
4
Micro
USB
USB
User manual
Manuale d’uso
Certificato di garanzia
Master
Slave
RIGHT
LEFT
Principale
Secondario
DESTRA
SINISTRA
Connect with
BRIONVEGA
WEARiT
USB
Micro USB
AUX IN
1
7
5
6
A
B
C
D
G
E
F
2
3
4