1. Adjust the contact force of the stylus:
Taking care not to damage the stylus, carefully per-
form the following operations:
lower the arm lifter
1.
[C]
and hold the arm in equi-
librium with your finger.
set the antiskating
2.
[A]
to zero (take the small
weight off the support and rest it on the record
player surface so that the weight does not pro-
duce any tension on the arm).
At this point rotate the counterweight
3.
[B]
until the
arm rests perfectly in equilibrium by itself, in the
space between the turntable and the retainer of
the arm. The position assumed should be per-
fectly horizontal.
11
Using the
audio functions
6
Record player
The record player on the top of the
Radio-phono-
graph rr-226
is manually operated.
It does not have either the automatic initial position-
ing of the stylus or the automatic arm return after the
record has finished playing.
!
Handle the arm and stylus of the record player
with care. Do not allow the record player stylus
to continue moving after the record has finished
playing, in order to avoid damaging or breaking
the stylus.
Before using the record player
Before using the record player, some important
operations must be carried out to set the forces
acting on the operation of the record player arm. To
perform the following operations:
Remove the plastic cover of the record player
1.
[1].
Be careful not to strike the arm or the stylus.
Make certain that the power switch of the record
2.
player is in the OFF position
(0)
and that the turntable
is not rotating when setting the forces.
To perform a correct setting of the arm, ensure that
3.
the Radio-phonograph is on a level surface free of
inclinations or unevenness that may invalidate the
arm setting.
[A]
[B]
[C]
Reference notch
RR-226_UK.indd 11
21-11-2008 12:10:01
