10
5 .
Complete the Installation
A .
Connect the shut off valve tube (J) to
the inlet water connection (1).
B .
Connect the faucet tubing (K)
connected to the 2/8 in. quick connect
(M) to the filtered water connection (2).
C .
Connect the faucet tubing (K)
connected to the 2/8 in. quick connect
(M) to the purified water connection (3).
D .
Connect the RO water outlet tube (I) to
the waste water connection (4).
E .
Ensure all connections are made, and
proceed to the Operation section for
starting for first time, plugging in, and
flushing.
I
4
3
2
1
K
J
Operation
Start Up the Filtration System
1 .
Ensure all water connections are completed as described in the Installation section.
2 .
Connect the power supply to the filtration system and then to an outlet.
The filter indicator panel turns on .
Start Water Purification
Open the faucet and the water purifier starts to produce water .
NOTE:
If the faucet runs water for a long time (for 2 hours), the water purifier enters overtime protection mode .
The display screen at the side of the machine flashes, and the device is no longer able to produce water .
Unplug the power plug until the indicator turns off . Plug the device in again to clear the protection mode .
Shut Down
1 .
Close the shut-off valve on the tube (J).
2 .
Unplug the power supply.