7
2�
Install the Filtration Faucet
NOTE:
If there is no hole in the sink or countertop
for the filtration faucet stem, drill a 1 in. hole
or use the hole for the soap dispenser.
A�
Insert the faucet stem (10) through the O-ring (11)
and into the hole in the sink or countertop.
B�
Under the sink, slide the rubber washer (12) onto
the faucet stem (10). Slide on the locking nut (13)
and hand tighten to ensure the faucet is secured
to the countertop or sink.
C�
Insert one end of the connector (14) onto the base
of the faucet stem (10) and pop a lock clip (L)
around the collet.
D�
Insert one end of the blue outlet water tubing (6)
into the other end of the connector (14) and pop
a lock clip (L) around the collet. Gently tug on the
blue tubing to ensure a secure connection.
G
10
12
13
14
11
11
6
L
12
13
3�
Make the Connections
A�
Insert the other end of the white inlet water
tubing (6) into the water inlet end of the filter
housing (C). If needed to accommodate the angle,
use the quick coupling (I) provided.
B�
Insert the other end of the blue outlet water
tubing (7) into the water outlet end of the filter
housing (C). If needed to accommodate the angle,
use the quick coupling (I) provided.
6
7
I
C