10
CLEANING AND MAINTENANCE
Use the Self-Cleaning Ozone Feature
It is highly recommended that you use the self-cleaning feature on a weekly basis to sanitize tanks
and water lines.
To activate the self-cleaning cycle, press in the
self-cleaning switch (8), hold for 5 seconds, and
release.
The Ozone icon on the bottom-right corner of
the display will begin blinking, indicating the
cleaning process is underway.
During the cleaning cycle, ozone is produced and injected into the water system. This ozone kills
ozone is converted to harmless oxygen and emitted into the air.
IMPORTANT:
The cycle takes 90 minutes to complete. During this time do not dispense and
drink the water. Doing so may result in an odd taste. For your convenience, we
recommend that you do this during a period when the dispenser is not in use,
you may smell a faint trace of ozone.
Care and Maintenance
•
Keep this dispenser in a dry and cool place and avoid direct sunshine.
•
Ensure the back of the dispenser is at least 20 cm (8 in.) away from the wall.
•
Never put the dispenser on paper or foam, which may store water and then cause creepage.
•
Do not use the dispenser outdoors or in a place that can be splashed by water.
•
If the dispenser is not in use for longer than a 24-hour period, turn off the heating switch or the
refrigerating switch to save power and drain any remaining water.
•
Clean your cabinet, controls, bottle probe and spout each time you change your water bottle.
Use a clean soft cloth and a food grade sanitizer or bleach.
•
8
