BRIO CLBL520SC, Instruction Manual, Page: 5 / 12

5
Indicator Panel Description
1 . Power indicator/self-cleaning light – When illuminated,
indicates that the dispenser is on . When blinking,
indicates that the self-cleaning feature is operating .
2 . Hot water indicator light – When illuminated, indicates
that the dispenser is heating water .
3 . Cold water indicator light – When illuminated, indicates
that the dispenser is cooling water .
4 . Bottle indicator light – When flashing, indicates that
your water bottle is empty and needs to be replaced
with a new water bottle .
Product Dimensions
HEIGHT WIDTH DEPTH
105 .1 cm (41 .4 in .) 31 .1 cm (12 .2 in .) 39 .6 cm (15 .6 in .)
Operational Specifications
CAUTION: This unit dispenses water at temperatures that can cause severe burns . Avoid direct
contact with hot water . Keep children and pets away from unit while dispensing . Never
allow children to dispense hot water without proper and direct supervision . Unplug unit
to prevent unsupervised use by children .
TEMPERATURE TANK CAPACITY FLOW RATE
DISPENSING
COLD WATER
37°-50°F / 3°-10°C 3 .6 L
35 mL per second /
1.5 L per hour
DISPENSING
HOT WATER
176°–198°F / 80°–92°C 1 L
35 mL per second /
4 .5 L per hour
INSTALLATION
1 . Determine Installation Location
A . Place the dispenser upright .
B . Locate the dispenser on a hard and level surface in a
cool shaded location near a grounded wall outlet .
NOTICE: Do NOT plug in the power cord until the entire
installation section is completed .
C . Position the back of the dispenser no closer than 20 cm
(8 in.) from a wall and permit free airflow between the
wall and water dispenser .
2 . Install the Drip Tray and Grid
A . Unwrap the drip tray (8) from the packaging material and
slide it onto the dispenser until it is secure in place .
1 2 3 4
Self Clean
8