Brinsea Ovation 28 EX, Operating Manual, Page: 8 / 22

8
AF37 US Issue 01
5.
6.
1 SETTING UP YOUR INCUBATOR
ASSEMBLY
5
: Place the top onto the base in the correct
orientation. The egg turning motor must sit over
the link. Check the top fits flush all the way
around the base edge.
6
: Find a suitable water container (1pt to 2pt).
Place next to the incubator.
IMPORTANT:
Do not place the water container
on top of the incubator or higher than the
incubator.
This is to prevent the water siphoning
through and flooding the incubator. The water
container is best placed next to the incubator on
the same surface.
Please ensure the incubator is used on a water
resistant surface.