manualshive.com logo in svg

Brinly STS-42BHDK, Owner'S Manual, Page: 19 / 20

Share
Download
Brinly STS-42BHDK Owner'S Manual Download Page 19

1018189 Rev. C

19

================================================================================================

SERVICE

GETTING QUALITY SERVICE

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

-  Do not allow material to remain in the hamper for extended 

periods of time. Clean the hamper using a water hose and 

allow to dry prior to storage.

-  Check all moving parts for wear and freedom of movement.

-  Routine lubrication of the pinion and dowel pin is required. 

We recommend in the fall before storage as a minimum. 

Remove,  clean  and  lubricate  the  dowel  pin  (21)  inside  the 

drive pinions (24 & 25) with a light oil such as WD40, 3 in 1, 

or similar. Do not use motor oil or grease.

-  Check the drive pinions for wear. These are considered normal 

wear  parts.  Contact  our  Customer  Service  Department  to 

purchase replacement drive pinions (Part Numbers R-2485-

RH and R-2485-LH). 

-  Lubricate the wheels annually with multipurpose grease.

-  Check all fasteners for tightness. 

-  Inspect for rust on painted surfaces. Sand lightly andtouch 

up damaged areas with enamel paint.

SPECIFICATIONS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Maximum Towing Speed  . . . . . . . . . . . . . . . . .

 5 mph

Hamper Capacity   . . . . . . . . . . . . . . . . . . . . .

20 cu.ft.

Maximum Hamper Weight    . . . . . . . . . . . . . .

120 lbs. 

Empty Weight with  

Dethatcher Attachment

  . . . . . . . . . . . . . . . . .

102 lbs.

Maximum Towed Weight with  

Dethatcher Attachment

  . . . . . . . . . . . . . . . . .

222 lbs.

Quality Continues with Quality Service 

We provide a process to handle your questions or problems. 

Follow the steps below to get answers to any questions you 

may have about yourproduct.

1.  Refer to your attachment & machine operator manuals.
2.  In North America or Canada, call 1-877-728-8224 and 

provide product serial number and model number.

NOTE:  Pinion (24 and 25) is marked “R” or “L” 

on the back side. “R” indicates RH and must 

be installed on the right hand side of the unit 

shown below.

DRIVE PINION REFERENCE

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Drive Pinion Reference

16

59

23

24 25

22

21

Lightly oil, no grease

Wheel axle oil/grease annually

NOTE:  Pinion (24 and 25) is marked

"R" or "L" on the back side. "R" indicates

RH and must be installed on the right

hand side of the unit shown below.

20

11

12

SERVICE

Do not allow material to remain in the hamper for extended

periods of time.  Clean the hamper using a water hose and

allow to dry prior to storage.

Check all moving parts for wear and freedom of movement.

Routine lubrication of the pinion and dowel pin is required.

We recommend in the fall before storage as a minimum.

Remove, clean and lubricate the dowel pin (21) inside the

drive pinions (24 &25) with a light oil such as WD40, 3 in1, 

or similar.  Do not use motor oil or grease.

Check the drive pinions for wear.  These are considered

normal wear parts.  Contact our Customer Service

Department to purchase replacement drive pinions (Part 

Numbers R-2485-RH and R-2485-LH).

Lubricate the wheels annually with multipurpose grease.

Check all fasteners for tightness.

Inspect for rust on painted surfaces.  Sand lightly and

touch up damaged areas with enamel paint.

SPECIFICATIONS

Maximum Towing Speed................................................................5 mph

Hamper Capacity.........................................................................20 cu.ft.

Maximum Hamper Weight ..........................................................120 lbs.

Empty Weight with Dethatcher Attachment.................................102 lbs.

Maximum Towed Weight with Dethatcher Attachment................222 lbs.

GETTING QUALITY SERVICE

Quality Continues with Quality Service

We provide a process to handle your questions or problems. Follow the

steps below to get answers to any questions you may have about your

product.

1.  Refer to your attachment and machine operator manuals.

2.  In North America or Canada, call 1-877-728-8224 and provide product 

     serial number and model number.

Right Side

Left Side

Lightly oil, 

no grease

Wheel axle oil / grease  

annually

Drive Pinion Reference

16

59

23

24 25

22

21

Lightly oil, no grease

Wheel axle oil/grease annually

NOTE:  Pinion (24 and 25) is marked

"R" or "L" on the back side. "R" indicates

RH and must be installed on the right

hand side of the unit shown below.

20

11

12

SERVICE

Do not allow material to remain in the hamper for extended

periods of time.  Clean the hamper using a water hose and

allow to dry prior to storage.

Check all moving parts for wear and freedom of movement.

Routine lubrication of the pinion and dowel pin is required.

We recommend in the fall before storage as a minimum.

Remove, clean and lubricate the dowel pin (21) inside the

drive pinions (24 &25) with a light oil such as WD40, 3 in1, 

or similar.  Do not use motor oil or grease.

Check the drive pinions for wear.  These are considered

normal wear parts.  Contact our Customer Service

Department to purchase replacement drive pinions (Part 

Numbers R-2485-RH and R-2485-LH).

Lubricate the wheels annually with multipurpose grease.

Check all fasteners for tightness.

Inspect for rust on painted surfaces.  Sand lightly and

touch up damaged areas with enamel paint.

SPECIFICATIONS

Maximum Towing Speed................................................................5 mph

Hamper Capacity.........................................................................20 cu.ft.

Maximum Hamper Weight ..........................................................120 lbs.

Empty Weight with Dethatcher Attachment.................................102 lbs.

Maximum Towed Weight with Dethatcher Attachment................222 lbs.

GETTING QUALITY SERVICE

Quality Continues with Quality Service

We provide a process to handle your questions or problems. Follow the

steps below to get answers to any questions you may have about your

product.

1.  Refer to your attachment and machine operator manuals.

2.  In North America or Canada, call 1-877-728-8224 and provide product 

     serial number and model number.

Right Side

Left Side

Left  

Side

Right  

Side

Summary of Contents for STS-42BHDK





















Reviews:

No comments