background image

L-1789E-F

2.

________________

________________

________________

CONGRATULATIONS on your the purchase pf your new Brinly-Hardy 

Lawn Sweeper!  Your lawn sweeper is designed, engineered and 

manufactured to give you the best possible dependability and 

performance.

CUSTOMER RESPONSIBILITIES

Please read and retain this manual.  The instructions enables you to      

assemble and maintain your lawn roller properly.  And please, always 

observe the "Safety" instructions.

TABLE OF CONTENTS

SAFETY ............ ..............................................................2-3    

   PARTS REFERENCE ......................................................4 

   PARTS LIST......................................................................5 

   ASSEMBLY ......................................................................6-11

   OPERATION.....................................................................11-13

   SERVICE..........................................................................14

PRODUCT IDENTIFICATION

PRODUCT COMPATIBLIITY

This lawn sweeper is designed for use with lawn tractors and lawn and 

garden tractors.

RECORD PURCHASE INFORMATION

Record your purchase information in the spaces provided below.

DATE OF PURCHASE:

COMPANY NAME:

COMPANY PHONE:

SERIAL NUMBER:

SAFETY LABELS

UNDERSTANDING THE MACHINE SAFETY LABELS

The machine safety labels shown in this section are placed in important areas 

on your machine to draw attention to potential safety hazards.

On your machine safety labels, the words DANGER, WARNING, and 

CAUTION are used with this safety-alert symbol. DANGER identifies the most 

serious hazards.

The operator's manual also explains any potential safety hazards whenever 

necessary in special safety messages that are identified with the word, 

CAUTION, and the safety-alert symbol.

________________

Safety-Alert Symbol

Summary of Contents for STS-42 LXH

















Reviews: