1019101-E
9
English Manual
================================================================================================
x11
25
7
25
ASSEMBLY
WEARING
GLOVES:
Position the eleven
Tines (
7
) and twenty-two
Spacer/Bearing Tubes (
25
)
on the Axle Assembly (
6
)
as follows:
• Bearing,
Small End First
(
25
)
• Aerator Tine (
7
)
• Bearing,
Large End First
(
25
)
CAUTION:
GLOVES ARE REQUIRED WHEN
HANDLING AERATOR TINES. Tines have extremely
sharp points. Use caution when handling.
Step 3-B
NOTE: The Bearings (
25
) have two small openings
and extensions. These are designed to sandwich the
Tines (
7
), sliding through and connecting.
Slide the Axle (
6
) through the hole
in the End Panel (
5
, right side
).
Add two 5/8" Thick, Flat Washers (
16
)
to the axle.
Step 3-A
16
16
6
5
6
