16
1020135-A
English Manual
ASSEMBLY
Figure 9a
*
36
ASSEMBLE GAUGE PLATE
9a. Insert Stop Handle (
31
) through the slot
opening at the top of the Gauge Plate (
11
).
9b. Insert the ‘S’ shaped end of Link Rod (
12
) through the
upper hole of the Flow Control Handle (
31
).
9c. Assemble Flow Control (
31
) to Gauge Plate (
11
) as
shown, using hardware provided:
• One 5/16” x -2-3/4” Hex Bolt (
36
)
• Two 5/16” Flat Washers (
32
)
• One Latch Spacer (
35
)
• Two Special Washers (
33
)
• One Spring (
34
)
• One 5/16” Hex Nut (
15
)
NOTE:
See graphic inset below for
hardware orientation.
Gate and handle movement can be adjusted
by tightening/loosening bolt (
36
).
9d. Attach Handle Stop (
30
) and Knob (
29
) as
shown, using hardware provided:
• One 5/16” x 3/4” Carriage Bolt (
41
)
• One Curved Washer (
39
).
36
36
36
36
36
15 -
Hex Nut
5/16” Qty. 1
34 -
Spring
Qty. 1
39 -
Washer
Crvd Qty. 1
32 -
Washer
5/16” Qty. 2
35 -
Spacer,
Latch Qty. 1
33 -
Washer
Special Qty. 2
36 -
5/16” x 2-1/4”
Hex Bolt Qty. 1
36
