background image

1009043-D

20.

The limited warranty set forth below is given by Brinly-Hardy 
Company with respect to new merchandise purchased and  used 
in the United States, its possessions and territories.

Brinly-Hardy Company warrants the products listed below against 
defects in material and workmanship, and will at its option, repair 
or replace, free of charge, any part found to be defective in 
materials or workmanship. This limited warranty shall only apply 
if this product has been assembled, operated, and maintained 
in accordance with the Operator’s manual furnished with the 
product, and has not been subject to misuse, abuse, commercial 
use, neglect, accident, improper maintenance, alteration, 
vandalism, theft, fi re, water, or damage because of other peril or 
natural disaster. 

Normal Wear Parts or components thereof are subject to separate 
terms as follows: All normal wear parts or component failures will 
be covered on the product for a period of 90 days.

Parts found to be defective within the warranty period will be 
replaced at our expense. Our obligation under this warranty is 
expressly limited to the replacement or repair, at our option, of 
parts found to be defective in material and workmanship.

HOW TO OBTAIN SERVICE:

 Warranty parts replacements 

are available, ONLY WITH PROOF OF PURCHASE, through our 
Customer Service Department. Call 877-728-8224. 

This limited warranty does not provide coverage in the following 
cases:

a) Routine maintenance items such as lubricants and fi lters.
b) Normal deterioration of the exterior fi nish due to use or 

exposure.

c) Transportation and/or labor charges.
d) The warranty does not include commercial and/or rental 

use.

No implied warranty, including any implied warranty of 
merchantability of fi tness for a particular purpose, applies 
after the applicable period of express written warranty above 
as to the part as identifi ed below. No other express warranty 
whether written or oral, except as mentioned above, given 
by any person or entity, including a dealer or retailer, with 
respect to any product, shall bind Brinly-Hardy Co. During 
the period of the warranty, the exclusive remedy is repair or 
replacement of the product as set forth above.
The provisions as set forth in this warranty provide the sole 
and exclusive remedy arising from the sale. Brinly-Hardy 
Co. shall not be liable for incidental or consequential loss 

Pull Behind Accessories

MANUFACTURER’S LIMITED WARRANTY

 FOR

or damage including, without limitation, expenses incurred 
for substitute or replacement lawn care services or for rental 
expenses to temporarily replace a warranted product.

Some states do not allow the exclusion or limitation of incidental 
or consequential damages, or limitations on how long an implied 
warranty lasts, so the above exclusions or limitations may not 
apply to you.

During the warranty period, the exclusive remedy is replacement 
of the part.   In no event shall recovery of any kind be greater that 
the amount of the purchase price of the product sold. Alteration 
of safety features of the product shall void this warranty. You 
assume the risk and liability for loss, damage, or injury to you and 
your property and/or to others and their property arising out of the 
misuse or inability to use this product.

This limited warranty shall not extend to anyone other than the 
original purchaser or to the person for whom it was purchased as 
a gift.

HOW STATE LAW RELATES TO THIS WARRANTY:

 This 

limited warranty gives you specifi c legal rights, and you may also 
have other rights which vary from state to state. 

IMPORTANT:

 The Warranty period stated below begins with 

the PROOF OF PURCHASE. Without the proof of purchase, the 
Warranty period begins from the date of manufacture determined 
by the serial number manufacturing date.

WARRANTY PERIOD:

The warranty period for the product shown in this manual is as 
follows: Steel Frame Parts: 2 Years. Tires, Wheels and Drive are 
normal wear parts - 90 days.

Brinly-Hardy Company, 3230 Industrial Parkway, Jeffersonville, IN 47130  (877) 728-8224    

Summary of Contents for STH-420BH





















Reviews: