BHS 2000 Quick Guide
https://alpha.adt.com/help/42.html[11/8/2018 11:52:15 PM]
To turn Chime mode off, [Cancel], otherwise it will turn off automatically when the system is turned
on.
For more information on this topic please visit the complete
.
Reset
To reset the system after an alarm event, first enter your [security code].
Then, to view the event, press the [Options] button until the display shows [Alarm Memory, Enter
Code] + your [security code].
Security Codes
Your system allows up to 6 different security codes for use by other users.
To add a user code, press the [Options] button until the display window shows [Auxiliary Code,
Enter Master Code].
Enter your [Master Security Code].
Select the desired number to assign. The window will then show [Enter New Code].
Enter the new user’s code.
The keypad will audibly confirm that the system accepted the new code.
To delete a user code, press the [Options] button until the display window shows [Auxiliary Code,
Enter Master Code].
Enter your [Master Security Code]. The window shows [Enter 1-6].
Enter the user number you would like to delete.
The display will show [Enter New Code]. Do not enter the auxiliary code. Press [Cancel] to delete the
code.
The keypad will audibly confirm the deletion from the system.
For more information on this topic please visit the complete
.
Trouble Conditions
Trouble conditions are issues that require your attention and are indicated on your panel’s display by:
No AC to indicate the use of backup battery.
Low Batt to indicate a low battery condition.
Zone number to indicate a zone has been tripped.
Line cut to indicate an interference with the telephone line.
All Trouble Condition alarms can be silenced by pressing the [Cancel] button, however the Trouble
Condition alarm will sound intermittently until the condition no longer exists.
