background image

SAFETY INFORMATION

Legal regulation of the European Community:

This D/A Converter had been designed and tested according to the guidelines EN55013 and EN55020, 

and it meets the safety requirements EN60065. 

Safety Information:

Brinkmann products should only be used in dry rooms with an ambient temperature between 55-86 

degrees Fahrenheit (13-30 degrees Celsius) and are only designed for 220-240V / 110-120V, 50 and 

60Hz alternating current. 

Please verify that the voltage rating of your power supply corresponds to the voltage requirement 

in your country!

Always keep the D/A Converter and power supply away from moisture, heat, open fire and other 

extreme conditions. Never expose to direct sunlight. 

Power Supply:

The power supply is only to be connected to grounded wall sockets. 

Please connect or disconnect the power supply from the D/A Converter only when the mains plug is 

disconnected from the mains.

Always disconnect the power supply from the mains when the D/A Converter is not used for a longer 

period of time (during holidays etc. )

Never leave the power supply unattended while it is connected to the mains.

Never place containers with fluids on either D/A Converter or power supply.

Never use solvent or sprays on any part of the D/A Converter or power supply!

There are NO user-serviceable parts inside the power supply. 

The Mains Fuse is located externally, in the AC Receptacle Socket. 

Never open the Chassis or Fuse Holder while the power supply is connected to the mains!

Attention, dangerous voltage!

The power supply is equipped with a temperature limiter that switches off at about 150 degrees 

F (65°C) ; to guarantee proper function please make sure to maintain free space for air circulation 

measuring 12” (30cm) above the power supply and 4” (10cm) on either side. The heatsinks and the 

power supply must never be covered! 

After disconnecting from the mains, the D/A Converter can be cleaned with a dry cloth or soft brush.  

Do NOT use liquid cleaners! Wet cleaning can cause damage!

Repairs, modifications etc. are only to be carried out by Brinkmann Audio GmbH itself or by our 

specifically authorized service centers! 

   

3

Summary of Contents for Nyquist





















Reviews: