background image

OWNER’S MANUAL MODEL 810-3420-A

ASSEMBLY AND OPERATING IN STRUC TIONS

SAVE THIS MANUAL FOR FUTURE REFERENCE

4 Burner Gas Grill

WARNING

•  Use outdoors only.
•  Read instructions before using the appliance. Failure to follow instructions 

could result in death, serious bodily injury, and/or property loss.

•  Warning: accessible parts may be very hot. Keep young children away.
•  Do not move the appliance during use.
•  Turn off the gas supply at the gas cylinder after use.
•  Any modification of the appliance, misuse, or failure to follow the 

instructions may be dangerous and will invalidate your warranty. This does 
not affect your statutory rights.

•  Retain these instructions for future reference.
•  Leak test your barbecue annually. Check the hose connections are tight 

and leak test them each time you reconnect the gas bottle.

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use 

and contact your local dealer.

FOR YOUR SAFETY

1. Do not store or use petrol or other 

flammable vapours or liquids in the 
vicinity of this or any other appliance.

2. A gas cylinder not connected for use 

shall not be stored in the vicinity of 
this or any other appliance

Summary of Contents for 810-3420-A

































Reviews: