BRINKMANN PUMPS Bplogic, Operating Manual, Page: 136 / 291

5 Operating the pump controller
136 bplogic intelligent pump controller 18/02/2021

Imp
o
rt
_
te
x
t-
list
s
-0
1
.p
n
g
Fig. 75
: “Import/export text lists”
4. In
“Import/export text lists”,
tap the
“Browse”
button.
5. Specify the source directory in which the edited text lists are saved.
6. Tap the
“Start import…”
button.

A message confirms that the text lists were imported successfully and re-
quests that you restart the pump controller.
7. Restart the pump controller (

section 5.6.2.7
“
Device restart
”
on page 200 ).

The new user-defined event message is stored in the system and can be
assigned to an action (
 “Setting logic module parameters and checking”
on page 136 ).
5.4.6.4 Setting logic module parameters and checking
This section enables you to:

Plan a logic module and set the parameters for the required actions as logic
functions

Check that the parameters set are correct
You can view the logic module’s parameters and its actions at any time, and check
that they are correct.
You can only set parameters for the logic module and its actions as long as the
logic module is deactivated.