13
Care & Cleaning Instructions
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER. DO NOT PLACE HANDHELD BURR
COFFEE GRINDER IN THE DISHWASHER!
1. Unplug the Conical Burr Grinder.
2. Remove the coffee bean hopper: turn the grinding dial counter-clockwise to OFF.
Pull the hopper and lid up and out of the grinding chamber.
3. Wipe the exterior with a damp cloth or paper towel to remove any excess ground coffee.
Wash in warm, soapy water, rinse and dry completely.
NOTE:
The ground coffee drawer, coffee bean hopper and lid are top rack dishwasher-safe.
4. Make sure to clean completely after each use.
5. It is recommended to clean out the coffee bean hopper after every few uses,
so coffee grounds do not build up.
6. After removing the bean hopper, remove the ring around the burr by simply pulling it
straight out. Make sure to wash and fully dry this part before placing it back into the unit.
7. Turn the unit upside-down and gently tap the bottom of the unit over a garbage can to
remove any built-up ground coffee.
8. To place back the ring, center it over the hole with the rounded edges facing the sides of
the grinder. You may need to wiggle it slightly back and forth to make sure that it is pushed
all the way back in and secured.
9. Ground coffee can also build up in the chute that delivers the grinds to the Removable
Ground Coffee Drawer. To release these grounds, remove the drawer and gently tap
the top of the unit a few times. The build-up should fall out easily. Never stick any objects,
including fingers up the chute to try and remove any built-up coffee.
Storing Instructions
1. Unplug the Electric Handheld Burr Grinder from electrical outlet.
WARNING:
Never store the Electric Handheld Burr Grinder while it is plugged in.
2. Store unit fully assembled in its box or in a clean, dry place.
SO-314757_50012 BRIM Burr Grinder_IM R2.indd 13
2017-11-03 9:25 AM