INSTALLATION
WARNING!
Before the installation and maintenance of the luminaire turn off the power supply!
Power supply cables must be connected according to the instruction and national
regulations. It is recommended that the installation is carried out by a qualified
electrician.
SCENA LED luminaires are fi xed to SCENA LED track by special adaptor that is fi xed to
a mobile which enables the smooth change of the inclination angle in a wide range.
ASSEMBLY INSTRUCTION
1. Turn adaptor knob [1] to „0” position – seen in the
window [2].
2. Turn adaptor arm [3] into left (connectors in adaptor
must be hidden).
3.
Insert adaptor with the luminaire into properly
mounted SCENA track rail. Th
e edge of the adaptor
must fi t into gap on the track. Th
is gap appoints the
safety earth connection line.
4. Turn adaptor arm [3] into right.
5. Turn adaptor knob [1] and choose
In the window [2] one of the power phases.
WARNINGS!
➢ Before installation ensure that the mains power supply is switched off !
➢ Th
e luminaire is suitable for SCENA track system.
➢ Th
e minimum distance form the lightened object: 0,5m between the luminaire and the
lightened object or surface.
➢ Do not cover the product to provide free air circulation!
➢ Do not hang or fasten anything on the product, especially for decoration!
➢ In case of the malfunction under no circumstances do not touch and do not use the product
any further. Disconnect the product from the power supply! If the product is touched or
used though malfunction it can cause danger such as fi re and electric shock.
➢ If the external cable or power cord of this luminaire is damaged, it shall be replaced
immediately by the qualifi ed person in order to avoid an electric shock.
➢ Th
e manufacturer is not responsible for defects of the product caused as a result of wrong
installation.
➢ We reserve the right to make changes in the product design.
SAFETY AND MAINTENANCE
➢ Th
e installation of the luminaire should be done by certifi ed and experienced electrician.
Before starting the installation you must absolutely turn off the main power supply, where
the luminaire should be connected to, to avoid accidental voltage connection.
➢ To keep the optimal technical parameters of the luminaire the perdiodical maintenance
should be carried out.
➢ Disconnect the product from the power supply and let it cool down, before cleaning.
Disregarding of this warning can cause danger such as electric shock or burning during
cleaning the product.
➢ Th
e housing of the luminaire should be cleaned by generally available cleaning supplies
and also dried with a soft cloth. Do not use corrosive chemicals and solvents. Do not use
stream of water under the pressure.
Th
e information in this document may change without prior warning. Possible changes will be taken
under consideration in the other releases of the manuals or complementary documents. Th
e Manufacturer
is not liable for faults resulting from non-compliance with the above instructions.
According to Article 568 §1 of the Polish Civil Code the implied warranty rights regarding physical defects
expire aft er two years counted from the day the luminaire was delivered to the Consumer.
SCENA LED
luminaires for SCENA track system
INSTALLATION AND OPERATION MANUAL
SCENA LED – LED luminaires to be used with SCENA track system
LED LIGHT SOURCES
SCENA LED luminaires are equipped with revolutionary LED light sources: COB (Chip On
Board) that are the most developed technologically. Light colour: warm white or neutral
white.
This symbol stands for selective collecting of the electrical and electronic
equipment, therefore, this product cannot be treated as other household’s waste.
It has to be left at a special used-equipment collection point. Th
e appropriate
dealing with the collection of used electrical and electronic equipment is crucial,
especially if the equipment includes dangerous components which have a negative infl uence
on the environment and on the health of people.
SCENA LED luminaires are designed to be used with SCENA track system. Th
ey are equipped
with special adaptors to be easily mounted on the track. Th
anks to horizontal and vertical
adjustment of the luminaire the illumination spot can be directed precisely.
Th
is type of luminaires are designed to create interesting illumination solutions with adjustable
light beam direction.
Application: lighting of residential spaces, offi
ces, representative buildings, museums, galleries,
exhibitions, shop windows, shops, supermarkets and other public buildings.
TECHNICAL DATA
Model
SCENA LED 20
SCENA LED 30
SCENA LED 40
Optical system
refl ector
Light viewing angle
24°
Voltage
220 ÷ 240V AC
Frequency
50/60Hz
Power of luminaire
20W
30W
40W
Protection rate
IP 20
Protection against electric shock
I
Type of LEDs
COB
Correlated colour temperature (CCT)
3000K / 4000K
Colour rendering indeks (CRI)
> 80
LED lifetime*
35 000 hours
Luminous fl ux of luminaire
1700 lm
2050 lm
2850 lm
Colour of housing
white / black
Operating temperature
+5°C ÷ +25°C
Weight
1.10kg
1.14kg
1.39kg
* this parameter is detailed on the basis of data provided by a LED manufacturer
SCENA LED 20 / 30
SCENA LED 40
EN
24°
HIGH QUALITY
0,5m
CRI>80
IP 20
220
-
240VAC
50/60Hz
www.brilum24.pl
BRILUM S.A.
ul. Wilanowska 1A, 05-520 Konstancin-Jeziorna, Poland
www.brilum24.pl
SCENA LED 40
SCENA LED 30
SCENA LED 20
