Brillion LANDSCAPE GLP-643, Assembly Instructions Operator'S Manual

Page: 6 / 18

Page 4
DISENGAGE CLUTCH (IF SO EQUIPPED)
OR RAISE SEEDER BEFORE BACKING UP.
FAILURE TO DO SO WILL DAMAGE
BRUSH AGITATORS.
IMPORTANT
5D505
5D505
8J309
2K123
1. DO NOT STAND OR WALK IN FRONT OF TRACTOR WHEN IT IS
MOVING FORWARD.
2. DO NOT STAND OR WALK BETWEEN TRACTOR & IMPLEMENT
WHEN EITHER OR BOTH ARE MOVING.
3. DO NOT STAND OR WALK BEHIND IMPLEMENT WHEN IT IS BEING
BACKED UP.
4. DO NOT RIDE OR ALLOW OTHERS TO RIDE ON TRACTOR OR
IMPLEMENT.
5. BLOCK IMPLEMENT TO PREVENT MOVEMENT WHEN UNHITCHED
FROM TRACTOR.
8J309
MOVING MACHINES CAN CAUSE INJURY. KEEP AWAY!
CAUTION
MOVING PART HAZARD
TO PREVENT SERIOUS INJURY FROM
MOVING PARTS:
• KEEP COVERS CLOSED DURING OPERATION.
• DO NOT ALLOW ANYONE TO RIDE OR CLIMB
ON MACHINE DURING OPERATION.
• KEEP OBSERVERS AWAY.
CAUTION
2K123
Safety Decals
There are three levels of hazard intensity that appear with the safety alert symbol on safety decals: DANGER,
WARNING, and CAUTION. The level of hazard intensity is determined by the following definitions:
DANGER - Immediate hazards which WILL result in severe personal injury or death.
WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
CAUTION - A reminder of safety practices, or an alert to unsafe practices which could result in personal
injury.
Examine safety decals and be sure you have the correct safety decals for the machine. Keep these signs clean so
they can be observed readily. It is important to keep these decals cleaned more frequently than the machine. Wash
with soap and water or cleaning solution as required. Replace decals that become damaged or lost.
Order decals through your BRILLION dealer.
When applying decals to the machine, be sure to clean the surface to remove any dirt or residue. Where possible,
sign placement should protect the sign from abrasion, damage, or obstruction from mud, dirty oil, etc.
This page shows the safety signs found on this machine. The illustration on the next page shows their placement
on the machine, together with its other decals.
178rev601 3K488