Page 7 INSTALLATION MANUAL
ATTACH BLADE
1.
To attach the blades on to the fan motor, locate the colour sticker next to the screw mounting holes.
With ‘THIS SIDE UP’ marking on the blade and attach to the fan motor then securing it in place
using the screws provided.
2.
Repeat Step 1 to attached the rest of the blades and tighten firmly. DO NOT OVER TIGHTEN the
screw, this will damage the blades, but ensure it is secure.
INSTALLATION
HANGING THE FAN
1. Carefully lift the fan, and place the
down rod ball assembly into the
mounting plate ensuring that the
ball correctly locks into place.
2. Refer to the following section detailing
‘Electrical Connection’ on page 6 for
details on how to wire this product
correctly.
3. After the fan has been wired to
the power supply, carefully
position all excess cable inside
the boundaries of the hanging
bracket.
Ridge
Ball Groove
Down Rod
Down Rod
Ball Assembly
Bracket