Brillia RAX9430SQB, Installation Instructions And Operation Manual, Page: 10 / 66

8
Wiring to Power Supply
SAFETY WARNING
RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD
MUST BE PROPERLY GROUNDED. MAKE SURE
THIS IS DONE BY SPECIALIZED ELECTRICIAN IN
ACCORDANCE WITH ALL APPLICABLE NATIONAL
AND LOCAL ELECTRICAL CODES. BEFORE
CONNECTING WIRES, SWITCH POWER OFF AT
SERVICE PANEL AND LOCK SERVICE PANEL TO
PREVENT POWER FROM BEING SWITCHED ON
ACCIDENTALLY.
10. Connect the electrical wires.
-
Connect three wires (black, white and green) to
house wires and cap with wire connectors.
Connect according to color: black to black, white
to white, and green to green as shown on Figure
9.
Duct Cover Installation
11. Slide inner duct cover up 2 inches before sliding
entire duct cover onto the hood. (Figure 10)
12. Align the inner duct cover to the duct cover-mounting
bracket. Secure inner duct cover with two (M4 x
8mm) screws (provided).
Install Accessories
13. Place baffle filters underneath the hood. Refer to
Figure 11.
Final Assembly
14. Turn power ON in control panel. Check all lights and
fan operation.
15. Leave this Installation Instructions and Operation
Manual for the homeowner.
Figure 9
Figure 10
Figure 11