4
10.
Fasten the screws simultaneously using the
Allen
key, but don’t tighten them
completely. Start with one first and then the other until they are fully adjusted.
11.
We recommend screwing the machine to the table with a clamp, as shown in
the picture.
12.
Place the support with 2 long bolts, washers and nuts.
13.
On the support, position the screen centred on the arm and screw in the 4
TP
screws alternatively.
14.
Screw in the 2 short bolts with
TB
on each side with the
Allen
key.
Adjust until
the screen stays up on its own and can be raised or lowered easily.
15.
Screw the nuts on the
TB
bolts. Each time you adjust the
TB
bolts, you will have
to loosen the nuts.
16.
Insert the
Allen
key through the two holes on the shaft. The
Allen
key will work
as a stopper when raising the screen.
17.
Magnetise the SKY key and stick it to the arm.
Summary of Contents for KRM-V3 PRO
Page 1: ...Page 1 5 KRM V3 PRO with support Assembly instructions...
Page 5: ...5...
