Brightwell Nexus Laundry System, Instruction Manual

Page: 102 / 103

H-2
Revision 1.1
04/2022
M0261 EN
H-2
FAULT MESSAGES & GLOSSARY
GLOSSARY
SIGNAL ACCEPTANCE
Length of time that a signal must be present on an Input before it is acknowledged.
FLUSH VALVE
24V DC output to control a Flush Solenoid (maximum 36W). This output is active throughout the
operation of any pump.
DELAY TIME
Adjustable time period between a signal being acknowledged and a pump beginning its operation.
FLOWRATE
The speed at which product is dispensed from a pump. Specified in ml/min.
RUN-TIME
Adjustable time period for which a pump will operate.
DOSAGE
The volume of product which is required to be dosed into a wash cycle by each pump.
PULSE
Signal number that a pump is to operate on. Pulse counter returns to zero when the unit resets.
RESET DELAY
Adjustable time period at the end of the wash cycle before the dispenser resets. The Reset Delay
begins after the operation of the final pump (ie: Pump 8, on an 8-Pump unit).
RELAY
Operational mode allowing the Pumps to run as if they were directly driven from the input signals.
SAFETY STOP
Water sensor input to detect the presence of water within a Manifold.
CYCLE COUNTERS
Provides a record of the number of cycles and length of time that has been completed by each
pump and program.
PRIME
Run the pump to fill the suction and delivery tubes.