BrightSign XD230, XD1030, XD1230
10
All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to
change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2012
pin
Description
pin
Description
1 Red analog video output
2 Green analog video output
3 Blue analog video output
4 NC
5 Digital ground
6 Analog ground
7 Analog ground
8 Analog ground
9 +5V DDC supply
10 Digital ground
11 NC
12 DDC SDA
13 HSYNC output
14 VSYNC output
15 DDC SCL
--
--
Triple RCA Component HD Video Connector
Component video is provided over the VGA connector. To display component video, you will need to use a VGA-to-
component converter. See this
FAQ
for more details.
3.5mm Audio Connector
The XD230, XD1030, and XD1230 each have one 3.5mm female audio connector, which transmits a stereo signal. The
full-scale voltage output of the audio is 2V RMS. The output impedance of the audio connector is 32
Ω
.
Note
:
The BrightSign expansion module allows you to drive up to three sets of 5
Ω
headphones directly.
The audio connector has the following pinout:
•
Tip
: Left audio
•
Ring
: Right audio
•
Sleeve
: Ground for audio signal
