Operating Instruction
EDID channel nouns explanation :
A Inlay A User (built-in EDID A)
B Inlay B User (built-in EDID B)
F Far-end Far end (HDBT)
N Ring-out Loop out
（
HDMI
）
The specific operations are as follows:
①
In video switch mode, input/output EDID mode , short press “F1 ” to check the current
output status.
②
After the checking, press the button "OK" to exit the mode.
4.11 Boot/Standby interface
The key time interval is no more than 60 seconds. If over 60 seconds, the LCD screen will
automatically enter the backlight mode and return to the video channel main interface.(the
default time is 60 /LCD backlight brightness is100, this can be set by the commands)
Boot/standby main interface (picture 11)
5. Connecting and Operating
1). Connect the HDMI input sources (such as HD-DVD, PS3, STB etc) into HDBaseT
Matrix.
2). Connect Cat5e/6 cable to HDBaseT output port of HDBaseT Matrix and HDBaseT
input of Receiver.
3). Connect HDMI sink devices (such as HD-LCD, HD-DLP) to the Receiver.
4). Power on the input source you want to show.
5). Connect the power cable into HDBaseT Matrix and turn on the display you want to
watch.
6). Use remote or push the button to choose input source.
*Note: Do not dispart the machine when power on because there is 220V AC power
inside the machine!
11
